add ui, change project struct

.gitignore

@@ -1,7 +1,7 @@
 build
 __pycache__
-tools/img/*.png
-tools/img/*.psd
-tools/img/*.jpg
-tools/img/*.c
-tools/img/*.h
+tools/**/*.png
+tools/**/*.psd
+tools/**/*.jpg
+tools/**/*.c
+tools/**/*.h

.vscode/tasks.json

@@ -2,32 +2,32 @@
 	"version": "2.0.0",
 	"tasks": [
 		{
-			"type": "cppbuild",
-			"label": "C/C++: arm-none-eabi-gcc 生成活动文件",
-			"command": "/usr/bin/arm-none-eabi-gcc",
-			"args": [
-				"-fdiagnostics-color=always",
-				"-g",
-				"${file}",
-				"-o",
-				"${fileDirname}/${fileBasenameNoExtension}",
-				"-ICore/Inc \\",
-				"-IDrivers/STM32G0xx_HAL_Driver/Inc \\",
-				"-IDrivers/STM32G0xx_HAL_Driver/Inc/Legacy \\",
-				"-IDrivers/CMSIS/Device/ST/STM32G0xx/Include \\",
-				"-IDrivers/CMSIS/Include"
-			],
+			"type": "shell",
+			"label": "GNUMake Build",
+			"detail": "编译项目",
+			"command": "make",
+			"args": [],
 			"options": {
-				"cwd": "${fileDirname}"
+				"cwd": "${workspaceFolder}"
 			},
-			"problemMatcher": [
-				"$gcc"
-			],
 			"group": {
 				"kind": "build",
 				"isDefault": true
+			}
+		},
+		{
+			"type": "shell",
+			"label": "GNUMake Build Flash Run",
+			"detail": "编译烧录并运行项目",
+			"command": "make && make flash",
+			"args": [],
+			"options": {
+				"cwd": "${workspaceFolder}"
 			},
-			"detail": "编译器: /usr/bin/arm-none-eabi-gcc"
+			"group": {
+				"kind": "test",
+				"isDefault": true
+			}
 		}
 	]
 }

Core/APP/app.c

@@ -1,388 +0,0 @@
-#include <app.h>
-#include <main.h>
-#include <st7735.h>
-#include <RotaryCoder.h>
-#include <KT0915.h>
-
-/*Arduino APP 未移植 不可用*/
-uint8_t app_setup(void){
-
-}
-/*
-Shows the static content on  display
-*/
-void showTemplate()
-{
-
-    int maxX1 = tft.width() - 2;
-    int maxY1 = tft.height() - 5;
-
-    tft.fillScreen(COLOR_BLACK);
-
-    tft.drawRect(2, 2, maxX1, maxY1, COLOR_YELLOW);
-    tft.drawLine(2, 40, maxX1, 40, COLOR_YELLOW);
-    tft.drawLine(2, 60, maxX1, 60, COLOR_YELLOW);
-}
-
-void clearStatus()
-{
-
-    char *unit;
-    char *bandMode;
-
-    int maxX1 = tft.width() - 6;
-    int maxY1 = tft.height() - 6;
-
-    tft.fillRect(3, 3, maxX1, 35, COLOR_BLACK);
-    // tft.fillRect(3,61,maxX1, maxY1 - 61, COLOR_BLACK);
-
-    if (band[bandIdx].mode == MODE_FM)
-    {
-        unit = (char *)"MHz";
-        bandMode = (char *)"FM";
-    }
-    else
-    {
-        unit = (char *)"KHz";
-        bandMode = (char *)"AM";
-    }
-    tft.setFont(&Serif_plain_7);
-    printValue(135, 15, oldMode, bandMode, 7, COLOR_YELLOW);
-    printValue(135, 36, oldUnit, unit, 7, COLOR_YELLOW);
-}
-
-/*
-  Prevents blinking during the frequency display.
-  Erases the old digits if it has changed and print the new digit values.
-*/
-void printValue(int col, int line, char *oldValue, char *newValue, uint8_t space, uint16_t color)
-{
-    int c = col;
-    char *pOld;
-    char *pNew;
-
-    pOld = oldValue;
-    pNew = newValue;
-
-    // prints just changed digits
-    while (*pOld && *pNew)
-    {
-        if (*pOld != *pNew)
-        {
-            // Erases olde value
-            tft.setTextColor(COLOR_BLACK);
-            tft.setCursor(c, line);
-            tft.print(*pOld);
-            // Writes new value
-            tft.setTextColor(color);
-            tft.setCursor(c, line);
-            tft.print(*pNew);
-        }
-        pOld++;
-        pNew++;
-        c += space;
-    }
-
-    // Is there anything else to erase?
-    tft.setTextColor(COLOR_BLACK);
-    while (*pOld)
-    {
-        tft.setCursor(c, line);
-        tft.print(*pOld);
-        pOld++;
-        c += space;
-    }
-
-    // Is there anything else to print?
-    tft.setTextColor(color);
-    while (*pNew)
-    {
-        tft.setCursor(c, line);
-        tft.print(*pNew);
-        pNew++;
-        c += space;
-    }
-
-    // Save the current content to be tested next time
-    strcpy(oldValue, newValue);
-}
-
-/*
-   Shows frequency information on Display
-*/
-void showFrequency()
-{
-    char freq[15];
-    char aux[15];
-
-    currentFrequency = rx.getFrequency();
-
-    // Serial.println(currentFrequency);
-
-    tft.setFont(&DSEG7_Classic_Mini_Regular_30);
-    tft.setTextSize(1);
-
-    if (band[bandIdx].mode == MODE_FM) // FM
-    {
-        sprintf(aux, "%6.6lu", currentFrequency);
-        freq[0] = aux[0];
-        freq[1] = aux[1];
-        freq[2] = aux[2];
-        freq[3] = '\0';
-        freq[4] = aux[3];
-        freq[5] = aux[4];
-        freq[6] = '\0';
-
-        printValue(2, 36, &oldFreq[0], &freq[0], 23, COLOR_RED);
-        printValue(82, 36, &oldFreq[4], &freq[4], 23, COLOR_RED);
-        tft.setCursor(80, 35);
-        tft.print('.');
-    }
-    else // AM
-    {
-        sprintf(aux, "%5lu", currentFrequency);
-        freq[0] = aux[0];
-        freq[1] = aux[1];
-        freq[2] = aux[2];
-        freq[3] = aux[3];
-        freq[4] = aux[4];
-        freq[5] = '\0';
-        printValue(2, 36, &oldFreq[0], &freq[0], 23, COLOR_RED);
-    }
-}
-
-/*
-    Show some basic information on display
-*/
-void showStatus()
-{
-    resetBuffer();
-    clearStatus();
-    showFrequency();
-    showVolume();
-    showBandwidth();
-}
-
-/* *******************************
-   Shows RSSI status
-*/
-void showRSSI()
-{
-    /*
-    char rssi[15];
-
-    // Check AM or FM
-    sprintf(rssi, "%3.3udBuV", (band[bandIdx].mode ==  MODE_FM)? rx.getFmRssi():rx.getAmRssi());
-    tft.setFont(&Serif_plain_14);
-    tft.setTextSize(1);
-    printValue(5, 55, oldRssi, rssi, 11, COLOR_WHITE);
-    */
-}
-
-void showBandwidth()
-{
-    char sBw[15];
-
-    if (band[bandIdx].mode != MODE_AM)
-        return;
-
-    sprintf(sBw, "%cKHz", am_bw[bwIdx]);
-
-    tft.setFont(&Serif_plain_14);
-    tft.setTextSize(1);
-    printValue(5, 80, oldBW, sBw, 11, COLOR_WHITE);
-}
-
-void showStereo()
-{
-    // char stereo[10];
-    // sprintf(stereo, "%s", (rx.isFmStereo()) ? "St" : "Mo");
-    // tft.setFont(&Serif_plain_14);
-    // tft.setTextSize(1);
-    // printValue(125, 55, oldStereo, stereo, 15, COLOR_WHITE);
-}
-
-/*
-   Shows the volume level on LCD
-*/
-void showVolume()
-{
-    // char sVolume[15];
-    // sprintf(sVolume, "Vol: %2.2u", rx.getVolume());
-    // printValue(80, 56, oldVolume, sVolume, 6, 1);
-}
-
-/*********************************************************
-
- *********************************************************/
-
-void showSplash()
-{
-    // Splash
-    tft.setFont(&Serif_plain_14);
-    tft.setTextSize(1);
-    tft.setTextColor(COLOR_YELLOW);
-    tft.setCursor(45, 23);
-    tft.print("KT0915");
-    tft.setCursor(15, 50);
-    tft.print("Arduino Library");
-    tft.setCursor(25, 80);
-    tft.print("By PU2CLR");
-    tft.setFont(&Serif_plain_14);
-    tft.setTextSize(0);
-    tft.setCursor(12, 110);
-    tft.print("Ricardo L. Caratti");
-    delay(4000);
-}
-
-void bandUp()
-{
-    // save the current frequency for the band
-    band[bandIdx].default_frequency = currentFrequency;
-
-    if (bandIdx < lastBand)
-    {
-        bandIdx++;
-    }
-    else
-    {
-        bandIdx = 0;
-    }
-    useBand();
-}
-
-void bandDown()
-{
-    // save the current frequency for the band
-    band[bandIdx].default_frequency = currentFrequency;
-
-    if (bandIdx > 0)
-    {
-        bandIdx--;
-    }
-    else
-    {
-        bandIdx = lastBand;
-    }
-    useBand();
-}
-
-void useBand()
-{
-
-    if (band[bandIdx].mode == MODE_FM)
-    {
-        rx.setFM(band[bandIdx].minimum_frequency, band[bandIdx].maximum_frequency, band[bandIdx].default_frequency, band[bandIdx].step);
-        rx.setDeEmphasis(DE_EMPHASIS_75);
-        // rx.setSoftMute(TURN_OFF);
-        rx.setFmAfc(TURN_ON);
-        rx.setMono(TURN_OFF); // Force stereo
-    }
-    else
-    {
-        rx.setAM(band[bandIdx].minimum_frequency, band[bandIdx].maximum_frequency, band[bandIdx].default_frequency, band[bandIdx].step);
-        rx.setAmAfc(TURN_ON);
-        rx.setSoftMute(TURN_OFF);
-        rx.setAmSpace(0); // Sets Am space channel to 1Khz.
-    }
-    delay(100);
-    currentFrequency = band[bandIdx].default_frequency;
-    rx.setFrequency(currentFrequency);
-    showStatus();
-}
-
-/**
- * Used to test the receiver functions implemented by the library
- */
-void doBandwidth()
-{
-    if (bwIdx == 3)
-        bwIdx = 0;
-    bwIdx++;
-    rx.setAmBandwidth(bwIdx);
-    showBandwidth();
-    showFrequency();
-    delay(300);
-}
-
-void doStereo()
-{
-    rx.setMono((bSt = !bSt));
-    bShow = true;
-    showStereo();
-    delay(100);
-}
-
-/**
-   Process seek command.
-   The seek direction is based on the last encoder direction rotation.
-*/
-void doSeek()
-{
-    delay(200);
-    bShow = true;
-    showFrequency();
-}
-
-/*
-   Button - Volume control
-*/
-void volumeButton(byte d)
-{
-
-    if (d == 1)
-        rx.setVolumeUp();
-    else
-        rx.setVolumeDown();
-
-    showVolume();
-    delay(MIN_ELAPSED_TIME); // waits a little more for releasing the button.
-}
-
-void doFilter()
-{
-}
-
-void APP_loop()
-{
-
-    // Check if the encoder has moved.
-    if (encoderCount != 0)
-    {
-        if (encoderCount == 1)
-        {
-            rx.setFrequencyUp();
-        }
-        else
-        {
-            rx.setFrequencyDown();
-        }
-        showFrequency();
-        bShow = true;
-        encoderCount = 0;
-    }
-
-    // Check button commands
-    if ((millis() - elapsedButton) > MIN_ELAPSED_TIME)
-    {
-        // check if some button is pressed
-        if (digitalRead(BAND_MODE_SWITCH_UP) == LOW)
-            bandUp();
-        else if (digitalRead(BAND_MODE_SWITCH_DOWN) == LOW)
-            bandDown();
-        else if (digitalRead(VOL_UP) == LOW)
-            volumeButton(1);
-        else if (digitalRead(VOL_DOWN) == LOW)
-            volumeButton(-1);
-        else if (digitalRead(SWITCH_BW) == LOW)
-            doBandwidth();
-    }
-
-    if ((millis() - pollin_elapsed) > POLLING_TIME)
-    {
-        showRSSI();
-        pollin_elapsed = millis();
-    }
-
-    delay(100);
-}

Core/App/Graphic/ui.c

@@ -0,0 +1,116 @@
+#include <stdint.h>
+#include "global.h"
+#include "st7735.h"
+#include "Images/digi18x32.h"
+#include "monoimg.h"
+#include "bmfont.h"
+#include "asciifont.h"
+
+void ui_text_number18x32(uint32_t num, uint16_t x, uint16_t y, uint16_t color) {
+    uint32_t tmp = num;
+    uint32_t div = 1;
+    uint8_t num_count = 0;
+    while (tmp > 0) {
+        tmp = tmp / 10;
+        num_count ++;
+        div = div * 10;
+    }
+    div = div / 10;
+    if (div == 0) {
+        mimg_Area area = mimg_get_tile_area(IMG_DIGI_18_32, 10, 1, 0);
+        mimg_draw(ST7735_DrawPixel, x, y, color, IMG_DIGI_18_32, area);
+    } else {
+        while (div > 0) {
+            tmp = (num / div) % 10;
+            mimg_Area area = mimg_get_tile_area(IMG_DIGI_18_32, 10, 1, tmp);
+            mimg_draw(ST7735_DrawPixel, x, y, color, IMG_DIGI_18_32, area);
+            x = x + 18;
+            div = div / 10;
+        }
+    }
+}
+
+// TODO: 绘制界面的函数
+/* UI元素 */
+void ui_com_main_border() {
+    // border
+    ST7735_FillRectangle(0, 0, ST7735_WIDTH, 1, ST7735_YELLOW);
+    ST7735_FillRectangle(0, 17, ST7735_WIDTH, 1, ST7735_YELLOW);
+    ST7735_FillRectangle(0, ST7735_HEIGHT - 34, ST7735_WIDTH, 1, ST7735_YELLOW);
+    ST7735_FillRectangle(0, ST7735_HEIGHT - 1, ST7735_WIDTH, 1, ST7735_YELLOW);
+    ST7735_FillRectangle(0, 0, 1, ST7735_HEIGHT, ST7735_YELLOW);
+    ST7735_FillRectangle(ST7735_WIDTH - 1, 0, 1, ST7735_HEIGHT, ST7735_YELLOW);
+}
+
+void ui_com_freq_digital(uint8_t clear) {
+    // 5位数字, 即高32，宽90
+    uint16_t off_x = (ST7735_WIDTH - 90) / 2;
+    uint16_t off_y = (ST7735_HEIGHT - 32 - 34 - 18) / 2 + 17;
+    if (clear) {
+        ST7735_FillRectangle(off_x, off_y, 32, 90, ST7735_BLACK);
+    }
+    uint16_t scale = 10000;
+    uint32_t tmp = 0;
+    while (scale > 0) {
+        tmp = (global_data.freq / scale) % 10;
+        ui_text_number18x32(tmp, off_x, off_y, ST7735_COLOR565(0xFF, 0x7F, 0));
+        off_x += 18;
+        scale /= 10;
+    }
+}
+
+void ui_com_progress_bar(uint8_t clear, uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint16_t border_color, uint16_t fill_color, uint32_t current, uint32_t total) {
+    if (clear) {
+        ST7735_FillRectangle(x, y, w, h, ST7735_BLACK);
+    }
+    // border
+    ST7735_FillRectangle(x, y, w, 1, border_color);
+    ST7735_FillRectangle(x, y + h - 1, w, 1, border_color);
+    ST7735_FillRectangle(x, y, 1, h, border_color);
+    ST7735_FillRectangle(x + w - 1, y, 1, h, border_color);
+    // bar
+    x += 1;
+    y += 1;
+    w -= 2;
+    h -= 2;
+    uint16_t bar_width = w * current / total;
+    ST7735_FillRectangle(x, y, bar_width, h, fill_color);
+}
+
+void ui_com_vol_bar(uint8_t clear) {
+    uint16_t off_x = 1;
+    uint16_t off_y = ST7735_HEIGHT - 33;
+    if (clear) {
+        ST7735_FillRectangle(off_x, off_y, ST7735_WIDTH - 2, 16, ST7735_BLACK);
+    }
+    uint16_t color_skyblue = ST7735_COLOR565(0, 0x7F, 0xFF);
+    // text, 32x16
+    off_x = off_x + (32 - bmf_get_text_width(font_unifont_16x16, u8str("VOL"), 3)) / 2;
+    bmf_draw_text(font_unifont_16x16, u8str("VOL"), 3, off_x, off_y, 32, 16, color_skyblue);
+    // bar
+    off_x = 1 + 32;
+    ui_com_progress_bar(clear, 33, off_y + 2, ST7735_WIDTH - 34 - 3, 13, ST7735_WHITE, color_skyblue, global_data.volumn, 16);
+}
+
+void ui_com_sig_bar(uint8_t clear) {
+    uint16_t off_x = 1;
+    uint16_t off_y = ST7735_HEIGHT - 17;
+    if (clear) {
+        ST7735_FillRectangle(off_x, off_y, ST7735_WIDTH - 2, 16, ST7735_BLACK);
+    }
+    // text, 32x16
+    off_x = off_x + (32 - bmf_get_text_width(font_unifont_16x16, u8str("SIG"), 3)) / 2;
+    bmf_draw_text(font_unifont_16x16, u8str("SIG"), 3, off_x, off_y, 32, 16, ST7735_GREEN);
+    // bar
+    off_x = 1 + 32;
+    ui_com_progress_bar(clear, 33, off_y + 1, ST7735_WIDTH - 34 - 3, 13, ST7735_WHITE, ST7735_GREEN, global_data.signal, 255);
+}
+
+/* 供外部调用的方法 */
+void ui_screen_main() {
+    ST7735_FillScreen(ST7735_BLACK);
+    ui_com_main_border();
+    ui_com_freq_digital(0);
+    ui_com_vol_bar(0);
+    ui_com_sig_bar(0);
+}

Core/App/Graphic/ui.h

@@ -2,3 +2,6 @@
 #include <stdint.h>
 
 void ui_text_number18x32(uint32_t num, uint16_t x, uint16_t y, uint16_t color);
+
+/* 绘制主界面 */
+void ui_screen_main();

Core/App/app.c

@@ -0,0 +1,11 @@
+#include "gpio.h"
+#include "ui.h"
+
+void app_init() {
+    ui_screen_main();
+}
+
+void app_main_loop() {
+    HAL_GPIO_TogglePin(LED_STATUS_GPIO_Port,LED_STATUS_Pin);
+    HAL_Delay(300);
+}

Core/App/app.h

@@ -0,0 +1,4 @@
+#pragma once
+
+void app_init();
+void app_main_loop();

Core/App/global.c

@@ -0,0 +1,9 @@
+#include <stdint.h>
+#include "global.h"
+
+GlobalData global_data = {
+    901, // freq
+    0, // freq_float
+    16, // volumn
+    97 //signal
+};

Core/App/global.h

@@ -0,0 +1,12 @@
+/** Global Data Define */
+#pragma once
+#include <stdint.h>
+
+typedef struct GlobalData {
+    uint32_t freq;
+    uint8_t freq_float;
+    uint8_t volumn;
+    uint8_t signal;
+} GlobalData;
+
+extern GlobalData global_data;

Core/Hardware/RotaryCoder/RotaryCoder.h

@@ -1,5 +1,5 @@
 // Rotary encoder library for Arduino.
-#include "main.h"
+#include "hardware.h"
 #include "tim.h"
 
 #ifndef rotary_h

Core/Hardware/ST7735/st7735.c

@@ -1,4 +1,7 @@
 /* vim: set ai et ts=4 sw=4: */
+#include <stdint.h>
+#include "gpio.h"
+#include "spi.h"
 #include "st7735.h"
 
 #define DELAY 0x80
@@ -148,9 +151,6 @@ static void ST7735_SetAddressWindow(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t
   data[1] = y0 + ST7735_YSTART;
   data[3] = y1 + ST7735_YSTART;
   ST7735_WriteData(data, sizeof(data));
-
-  // write to RAM
-  ST7735_WriteCommand(ST7735_RAMWR);
 }
 
 void ST7735_Init()
@@ -171,6 +171,7 @@ void ST7735_DrawPixel(uint16_t x, uint16_t y, uint16_t color) //画点
   ST7735_Select();
 
   ST7735_SetAddressWindow(x, y, x + 1, y + 1);
+  ST7735_WriteCommand(ST7735_RAMWR);
   uint8_t data[] = {color >> 8, color & 0xFF};
   ST7735_WriteData(data, sizeof(data));
 
@@ -240,6 +241,7 @@ void ST7735_FillRectangle(uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint16
 
   ST7735_Select();
   ST7735_SetAddressWindow(x, y, x + w - 1, y + h - 1);
+  ST7735_WriteCommand(ST7735_RAMWR);
 
   uint8_t data[] = {color >> 8, color & 0xFF};
   HAL_GPIO_WritePin(ST7735_DC_GPIO_Port, ST7735_DC_Pin, GPIO_PIN_SET);
@@ -271,6 +273,7 @@ void ST7735_DrawImage(uint16_t x, uint16_t y, uint16_t w, uint16_t h, const uint
 
   ST7735_Select();
   ST7735_SetAddressWindow(x, y, x + w - 1, y + h - 1);
+  ST7735_WriteCommand(ST7735_RAMWR);
   ST7735_WriteData((uint8_t *)data, sizeof(uint16_t) * w * h);
   ST7735_Unselect();
 }

Core/Hardware/ST7735/st7735.h

@@ -3,8 +3,10 @@
 #define __ST7735_H__
 
 #include <stdbool.h>
+#include <stdint.h>
 #include <stdlib.h>
-#include "main.h"
+#include "hardware.h"
+#include "spi.h"
 
 #define ST7735_MADCTL_MY  0x80
 #define ST7735_MADCTL_MX  0x40

Core/Hardware/SWI2C/i2c_sw.h

@@ -2,7 +2,7 @@
 #define __I2C_SW_H
 
 /* includes */
-#include "main.h"
+#include "hardware.h"
 #include "stdio.h"
 
 /* defines */

Core/Hardware/kt0915/KT0915.h

@@ -18,7 +18,7 @@
 
 /* #include <Arduino.h>
 #include <Wire.h> */
-#include "main.h"
+#include "hardware.h"
 #include "i2c_sw.h"
 
 #define KT0915_I2C_ADDRESS 0x6A  //arduino:0x35 It is needed to check it when the KT0915 device arrives.

Core/Inc/hardware.h

@@ -0,0 +1,40 @@
+#include "stm32g0xx_hal.h"
+
+#define ENCODER_KEY_Pin GPIO_PIN_13
+#define ENCODER_KEY_GPIO_Port GPIOC
+#define KEY_1_Pin GPIO_PIN_0
+#define KEY_1_GPIO_Port GPIOA
+#define KEY_2_Pin GPIO_PIN_1
+#define KEY_2_GPIO_Port GPIOA
+#define KEY_3_Pin GPIO_PIN_2
+#define KEY_3_GPIO_Port GPIOA
+#define KEY_4_Pin GPIO_PIN_3
+#define KEY_4_GPIO_Port GPIOA
+#define KEY_5_Pin GPIO_PIN_4
+#define KEY_5_GPIO_Port GPIOA
+#define LCD_BK_Pin GPIO_PIN_6
+#define LCD_BK_GPIO_Port GPIOA
+#define LED_2_Pin GPIO_PIN_8
+#define LED_2_GPIO_Port GPIOA
+#define ENCODER_A_Pin GPIO_PIN_6
+#define ENCODER_A_GPIO_Port GPIOC
+#define ENCODER_B_Pin GPIO_PIN_7
+#define ENCODER_B_GPIO_Port GPIOC
+#define LED_3_Pin GPIO_PIN_11
+#define LED_3_GPIO_Port GPIOA
+#define LED_4_Pin GPIO_PIN_12
+#define LED_4_GPIO_Port GPIOA
+#define LED_STATUS_Pin GPIO_PIN_15
+#define LED_STATUS_GPIO_Port GPIOA
+#define LCD_RST_Pin GPIO_PIN_0
+#define LCD_RST_GPIO_Port GPIOD
+#define KEY_6_Pin GPIO_PIN_1
+#define KEY_6_GPIO_Port GPIOD
+#define LCD_DC_Pin GPIO_PIN_2
+#define LCD_DC_GPIO_Port GPIOD
+#define LED_1_Pin GPIO_PIN_3
+#define LED_1_GPIO_Port GPIOD
+#define SWI2C_SCL_Pin GPIO_PIN_3
+#define SWI2C_SCL_GPIO_Port GPIOB
+#define SWI2C_SDA_Pin GPIO_PIN_4
+#define SWI2C_SDA_GPIO_Port GPIOB

Core/Inc/main.h

@@ -31,6 +31,7 @@ extern "C" {
 
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
+#include "hardware.h"
 
 /* USER CODE END Includes */
 
@@ -57,44 +58,6 @@ void Error_Handler(void);
 /* USER CODE END EFP */
 
 /* Private defines -----------------------------------------------------------*/
-#define ENCODER_KEY_Pin GPIO_PIN_13
-#define ENCODER_KEY_GPIO_Port GPIOC
-#define KEY_1_Pin GPIO_PIN_0
-#define KEY_1_GPIO_Port GPIOA
-#define KEY_2_Pin GPIO_PIN_1
-#define KEY_2_GPIO_Port GPIOA
-#define KEY_3_Pin GPIO_PIN_2
-#define KEY_3_GPIO_Port GPIOA
-#define KEY_4_Pin GPIO_PIN_3
-#define KEY_4_GPIO_Port GPIOA
-#define KEY_5_Pin GPIO_PIN_4
-#define KEY_5_GPIO_Port GPIOA
-#define LCD_BK_Pin GPIO_PIN_6
-#define LCD_BK_GPIO_Port GPIOA
-#define LED_2_Pin GPIO_PIN_8
-#define LED_2_GPIO_Port GPIOA
-#define ENCODER_A_Pin GPIO_PIN_6
-#define ENCODER_A_GPIO_Port GPIOC
-#define ENCODER_B_Pin GPIO_PIN_7
-#define ENCODER_B_GPIO_Port GPIOC
-#define LED_3_Pin GPIO_PIN_11
-#define LED_3_GPIO_Port GPIOA
-#define LED_4_Pin GPIO_PIN_12
-#define LED_4_GPIO_Port GPIOA
-#define LED_STATUS_Pin GPIO_PIN_15
-#define LED_STATUS_GPIO_Port GPIOA
-#define LCD_RST_Pin GPIO_PIN_0
-#define LCD_RST_GPIO_Port GPIOD
-#define KEY_6_Pin GPIO_PIN_1
-#define KEY_6_GPIO_Port GPIOD
-#define LCD_DC_Pin GPIO_PIN_2
-#define LCD_DC_GPIO_Port GPIOD
-#define LED_1_Pin GPIO_PIN_3
-#define LED_1_GPIO_Port GPIOD
-#define SWI2C_SCL_Pin GPIO_PIN_3
-#define SWI2C_SCL_GPIO_Port GPIOB
-#define SWI2C_SDA_Pin GPIO_PIN_4
-#define SWI2C_SDA_GPIO_Port GPIOB
 
 /* USER CODE BEGIN Private defines */
 

Core/ST7735/UI/ui.c

@@ -1,25 +0,0 @@
-#include <stdint.h>
-#include "Images/digi18x32.h"
-#include "monoimg.h"
-#include "st7735.h"
-
-void ui_text_number18x32(uint32_t num, uint16_t x, uint16_t y, uint16_t color) {
-    uint32_t tmp = num;
-    uint32_t div = 1;
-    uint8_t num_count = 0;
-    while (tmp > 0) {
-        tmp = tmp / 10;
-        num_count ++;
-        div = div * 10;
-    }
-    div = div / 10;
-    while (div > 0) {
-        tmp = (num / div) % 10;
-        mimg_Area area = mimg_get_tile_area(IMG_DIGI_18_32, 10, 1, tmp);
-        mimg_draw(ST7735_DrawPixel, x, y, color, IMG_DIGI_18_32, area);
-        x = x + 18;
-        div = div / 10;
-    }
-}
-
-// TODO: 绘制文字的方法

Core/Src/main.c

@@ -26,11 +26,8 @@
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
 #include <stdio.h>
-#include "RotaryCoder.h"
 #include "st7735.h"
-#include "ui.h"
-#include "bmfont.h"
-#include "asciifont.h"
+#include "app.h"
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -71,8 +68,6 @@ void LCD_init()
 {
   ST7735_Init(); // 屏幕初始化
   HAL_GPIO_WritePin(LCD_BK_GPIO_Port, LCD_BK_Pin, GPIO_PIN_SET);
-  //const char ready[] = "Init Ready!\r\n";
-  //HAL_UART_Transmit(&huart1, (uint8_t *)ready, sizeof(ready) - 1, HAL_MAX_DELAY);
 }
 /* USER CODE END 0 */
 
@@ -108,16 +103,8 @@ int main(void)
   MX_SPI1_Init();
   MX_TIM3_Init();
   /* USER CODE BEGIN 2 */
-  /*EC11_init();
-  uint16_t Count;
-  uint16_t Diretion;*/
-  printf("program start\n");
   LCD_init();
-  ST7735_FillScreen(ST7735_WHITE);
-  printf("Begin draw number\n");
-  ui_text_number18x32(10086, 0, 0, ST7735_BLUE);
-  bmf_draw_text(font_unifont_16x16, u8str("Test Ascii\nHello Dragon Ok~~~~"), 29, 0, 40, 160, 64, ST7735_BLACK);
-  printf("End draw number\n");
+  app_init();
   /* USER CODE END 2 */
 
   /* Infinite loop */
@@ -126,16 +113,7 @@ int main(void)
   {
     /* USER CODE END WHILE */
     /* USER CODE BEGIN 3 */
-    HAL_GPIO_TogglePin(LED_STATUS_GPIO_Port,LED_STATUS_Pin);
-    HAL_Delay(300);
-
-    /*
-    Count = EC11_COUNT();
-    Diretion = EC11_DIR();
-    printf("DIRE:%d  COUNT:%d \r\n",Diretion,Count);
-    HAL_Delay(500);
-  */
-
+    app_main_loop();
   }
   /* USER CODE END 3 */
 }

Core/Src/spi.c

@@ -39,7 +39,8 @@ void MX_SPI1_Init(void)
   /* USER CODE END SPI1_Init 1 */
   hspi1.Instance = SPI1;
   hspi1.Init.Mode = SPI_MODE_MASTER;
-  hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+  // hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+  hspi1.Init.Direction = SPI_DIRECTION_1LINE;
   hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
   hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
   hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;

Makefile

@@ -13,7 +13,7 @@
 ######################################
 # target
 ######################################
-TARGET = radio-gnumake_test
+TARGET = radio-gnumake
 
 
 ######################################
@@ -64,15 +64,16 @@ Core/Src/gpio.c \
 Core/Src/usart.c \
 Core/Src/spi.c \
 Core/Src/system_stm32g0xx.c \
-Core/RotaryCoder/RotaryCoder.c	\
-Core/ST7735/st7735.c \
-Core/ST7735/UI/monoimg.c \
-Core/ST7735/UI/ui.c \
-Core/ST7735/UI/bmfont.c \
-Core/ST7735/UI/asciifont.c \
-#Core/kt0915/KT0915.C \
-#Core/SWI2C/i2c_sw.c \
-#Core/APP/app.c 
+Core/App/app.c \
+Core/App/global.c \
+Core/Hardware/RotaryCoder/RotaryCoder.c	\
+Core/Hardware/ST7735/st7735.c \
+Core/App/Graphic/monoimg.c \
+Core/App/Graphic/ui.c \
+Core/App/Graphic/bmfont.c \
+Core/App/Graphic/asciifont.c \
+#Core/Hardware/kt0915/KT0915.C \
+#Core/Hardware/SWI2C/i2c_sw.c \
 
 
 # ASM sources
@@ -135,15 +136,13 @@ C_INCLUDES =  \
 -IDrivers/STM32G0xx_HAL_Driver/Inc/Legacy \
 -IDrivers/CMSIS/Device/ST/STM32G0xx/Include \
 -IDrivers/CMSIS/Include	 \
--ICore/RotaryCoder \
 -IDrivers/CMSIS/Include \
--ICore/ST7735	\
--ICore/ST7735/UI \
-# -ICore/ST7735/Images \
-#-ICore/kt0915 \
-#-ICore/SWI2C  \
-#-ICore/APP 
-
+-ICore/App \
+-ICore/Hardware/RotaryCoder \
+-ICore/Hardware/ST7735	\
+-ICore/App/Graphic \
+#-ICore/Hardware/kt0915 \
+#-ICore/Hardware/SWI2C  \
 
 
 # compile gcc flags
@@ -210,7 +209,13 @@ $(BUILD_DIR):
 #######################################
 clean:
 	-rm -fR $(BUILD_DIR)
-  
+
+#######################################
+# flash
+#######################################
+flash:
+	-JLinkExe cmd.jexe
+
 #######################################
 # dependencies
 #######################################

Makefile.bak

@@ -1,209 +0,0 @@
-##########################################################################################################################
-# File automatically-generated by tool: [projectgenerator] version: [3.18.0-B7] date: [Sun Jan 15 03:57:37 CST 2023] 
-##########################################################################################################################
-
-# ------------------------------------------------
-# Generic Makefile (based on gcc)
-#
-# ChangeLog :
-#	2017-02-10 - Several enhancements + project update mode
-#   2015-07-22 - first version
-# ------------------------------------------------
-
-######################################
-# target
-######################################
-TARGET = radio-gnumake_test
-
-
-######################################
-# building variables
-######################################
-# debug build?
-DEBUG = 1
-# optimization
-OPT = -Og
-
-
-#######################################
-# paths
-#######################################
-# Build path
-BUILD_DIR = build
-
-######################################
-# source
-######################################
-# C sources
-C_SOURCES =  \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_dma.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c \
-Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c \
-Core/Src/tim.c \
-Core/Src/main.c \
-Core/Src/stm32g0xx_it.c \
-Core/Src/stm32g0xx_hal_msp.c \
-Core/Src/gpio.c \
-Core/Src/usart.c \
-Core/Src/spi.c \
-Core/Src/system_stm32g0xx.c \
-Core/RotaryCoder/RotaryCoder.c
-#Core/kt0915/KT0915.C \
-#Core/kt0915/KT0915.C \
-#Core/ST7735/fonts.c \
-#Core/SWI2C/i2c_sw.c \
-
-
-# ASM sources
-ASM_SOURCES =  \
-startup_stm32g030xx.s
-
-
-#######################################
-# binaries
-#######################################
-PREFIX = arm-none-eabi-
-# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
-# either it can be added to the PATH environment variable.
-ifdef GCC_PATH
-CC = $(GCC_PATH)/$(PREFIX)gcc
-AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
-CP = $(GCC_PATH)/$(PREFIX)objcopy
-SZ = $(GCC_PATH)/$(PREFIX)size
-else
-CC = $(PREFIX)gcc
-AS = $(PREFIX)gcc -x assembler-with-cpp
-CP = $(PREFIX)objcopy
-SZ = $(PREFIX)size
-endif
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary -S
- 
-#######################################
-# CFLAGS
-#######################################
-# cpu
-CPU = -mcpu=cortex-m0plus
-
-# fpu
-# NONE for Cortex-M0/M0+/M3
-
-# float-abi
-
-
-# mcu
-MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
-
-# macros for gcc
-# AS defines
-AS_DEFS = 
-
-# C defines
-C_DEFS =  \
--DUSE_HAL_DRIVER \
--DSTM32G030xx
-
-
-# AS includes
-AS_INCLUDES = 
-
-# C includes
-C_INCLUDES =  \
--ICore/Inc \
--IDrivers/STM32G0xx_HAL_Driver/Inc \
--IDrivers/STM32G0xx_HAL_Driver/Inc/Legacy \
--IDrivers/CMSIS/Device/ST/STM32G0xx/Include \
--IDrivers/CMSIS/Include	 \
--ICore/RotaryCoder
-#-ICore/kt0915 \
-#-ICore/SWI2C  \
-
-
-
-# compile gcc flags
-ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
-
-CFLAGS += $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
-
-ifeq ($(DEBUG), 1)
-CFLAGS += -g -gdwarf-2
-endif
-
-
-# Generate dependency information
-CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
-
-
-#######################################
-# LDFLAGS
-#######################################
-# link script
-LDSCRIPT = STM32G030C8Tx_FLASH.ld
-
-# libraries
-LIBS = -lc -lm -lnosys 
-LIBDIR = 
-LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
-
-# default action: build all
-all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
-
-
-#######################################
-# build the application
-#######################################
-# list of objects
-OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
-vpath %.c $(sort $(dir $(C_SOURCES)))
-# list of ASM program objects
-OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
-vpath %.s $(sort $(dir $(ASM_SOURCES)))
-
-$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR) 
-	$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
-
-$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
-	$(AS) -c $(CFLAGS) $< -o $@
-
-$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
-	$(CC) $(OBJECTS) $(LDFLAGS) -o $@
-	$(SZ) $@
-
-$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
-	$(HEX) $< $@
-	
-$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
-	$(BIN) $< $@	
-	
-$(BUILD_DIR):
-	mkdir $@		
-
-#######################################
-# clean up
-#######################################
-clean:
-	-rm -fR $(BUILD_DIR)
-  
-#######################################
-# dependencies
-#######################################
--include $(wildcard $(BUILD_DIR)/*.d)
-
-# *** EOF ***

cmd.jexe

@@ -2,8 +2,8 @@ Device STM32G030C8
 SelectInterface SWD
 Speed auto
 Connect
-LoadFile build/radio-gnumake_test.bin 0x8000000
-VerifyBin build/radio-gnumake_test.bin 0x8000000
+LoadFile build/radio-gnumake.bin 0x8000000
+VerifyBin build/radio-gnumake.bin 0x8000000
 Reset
 Go
 EXit

radio-gnumake.ioc

@@ -183,8 +183,8 @@ ProjectManager.MainLocation=Core/Src
 ProjectManager.NoMain=false
 ProjectManager.PreviousToolchain=
 ProjectManager.ProjectBuild=false
-ProjectManager.ProjectFileName=radio-gnumake_test.ioc
-ProjectManager.ProjectName=radio-gnumake_test
+ProjectManager.ProjectFileName=radio-gnumake.ioc
+ProjectManager.ProjectName=radio-gnumake
 ProjectManager.RegisterCallBack=
 ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=Makefile