2023-01-23 16:39:02 +08:00

583 lines
21 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/**
* @mainpage PU2CLR KT0915 Arduino Library
* @brief PU2CLR KT0915 Arduino Library implementation. <br>
* @details This is an Arduino library for the KT0915, BROADCAST RECEIVER.<br>
* @details It works with I2C protocol and can provide an easier interface for controlling the KT0915 device.<br>
* @details This library was built based on KT0915 Datasheet from KTMicro (Monolithic Digital FM/MW/SW/LW Receiver Radio-on-a-Chip TM).
* @details Others sources help the author to build this library. They are referenced in the documentation for this library on: https://github.com/pu2clr/KT0915
* @details This library uses the I2C protocols to read and write KT0915 registers. In this context, registers are memory position into the device.
* @details The KT0915 is a full band AM (LW, MW and SW) and FM DSP receiver that can provide you a easy way to build a high quality radio with low cost.
* @details This device, will surprise hobbyists and experimenters with its simplicity.
*
* This library can be freely distributed using the MIT Free Software model.
*
* Copyright (c) 2020 Ricardo Lima Caratti.
* Contact: pu2clr@gmail.com
*/
/* #include <Arduino.h>
#include <Wire.h> */
#include "hardware.h"
#include "i2c_sw.h"
#define KT0915_I2C_ADDRESS 0x6A //arduino:0x35 It is needed to check it when the KT0915 device arrives.
#define MODE_FM 0
#define MODE_AM 1
#define TURN_ON 1
#define TURN_OFF 0
#define ENABLE_ON 1
#define ENABLE_OFF 0
#define DE_EMPHASIS_75 0
#define DE_EMPHASIS_50 1
#define OSCILLATOR_32KHZ 0 // 32.768KHz
#define OSCILLATOR_6_5MHZ 1 // 6.5MHz
#define OSCILLATOR_7_6MHZ 2 // 7.6MHz
#define OSCILLATOR_12MHZ 3 // 12MHz
#define OSCILLATOR_13MHZ 4 // 13MHz
#define OSCILLATOR_15_2MHZ 5 // 15.2MHz
#define OSCILLATOR_19_2MHZ 6 // 19.2MHz
#define OSCILLATOR_24MHZ 7 // 24MHz
#define OSCILLATOR_26MHZ 8 // 26MHz
#define OSCILLATOR_38KHz 9 // 38KHz
#define REF_CLOCK_ENABLE 1 // Reference Clock
#define REF_CLOCK_DISABLE 0 // Crystal Clock
#define DIAL_MODE_ON 1 // Mechanical tuning (Via 100K resistor)
#define DIAL_MODE_OFF 0 // MCU (Arduino) tuning
#define REG_CHIP_ID 0x01
#define REG_SEEK 0x02
#define REG_TUNE 0x03
#define REG_VOLUME 0x04
#define REG_DSPCFGA 0x05
#define REG_LOCFGA 0x0A
#define REG_LOCFGC 0x0C
#define REG_RXCFG 0x0F
#define REG_STATUSA 0x12
#define REG_STATUSB 0x13
#define REG_STATUSC 0x14
#define REG_AMSYSCFG 0x16
#define REG_AMCHAN 0x17
#define REG_AMCALI 0x18
#define REG_GPIOCFG 0x1D
#define REG_AMDSP 0x22
#define REG_AMSTATUSA 0x24
#define REG_AMSTATUSB 0x25
#define REG_SOFTMUTE 0x2E
#define REG_USERSTARTCH 0x2F
#define REG_USERGUARD 0x30
#define REG_USERCHANNUM 0x31
#define REG_AMCFG 0x33
#define REG_AMCFG2 0x34
#define REG_AFC 0x3C
//typedef uint8_t bool;
/**
* @defgroup GA01 Union, Structure and Defined Data Types
* @brief KT0915 Defined Data Types
* @details Defined Data Types is a way to represent the KT0915 registers information
* @details Some information appears to be inaccurate due to translation problems from Chinese to English.
* @details The information shown here was extracted from Datasheet:
* @details KT0915 stereo FM / TV / MW / SW / LW digital tuning radio documentation.
* @details Other information seems incomplete even in the original Chinese Datasheet.
* @details For example: Reg 10 (0x0A). There is no information about it. The Reg11 and 12 seem wrong
*/
/**
* @ingroup GA01
* @brief 3.10.1. CHIP ID (Address 0x01)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 15.
*/
typedef union {
uint16_t chip_id;
char chip_id_ascii[2];
} kt09xx_chip_id;
/**
* @ingroup GA01
* @brief 3.10.2. SEEK (Address 0x02)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 15.
*/
typedef union {
struct
{
uint8_t DMUTEL : 1; //!< Left Channel Mute Control; 0 = Left channel mute enable; 1 = Left channel mute disable
uint8_t DMUTER : 1; //!< Right Channel Mute Control; 0 = Left channel mute enable; 1 = Left channel mute disable
uint8_t FMSPACE : 2; //!< FM Channel Spacing; 00 = 200KHz; 01 = 100KHz; 10 = 50KHz
uint16_t RESERVED : 11; //!< Reserved
} refinied;
uint16_t raw;
} kt09xx_seek;
/**
* @ingroup GA01
* @brief 3.10.3. TUNE (Address 0x03)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 15.
*/
typedef union {
struct
{
uint16_t FMCHAN : 12; //!< FM Channel Setting FMCHAN<11:0>=Frequency (KHz) / 50KHz. For example, if desired channel is 86MHz, then the FMCHAN<11:0> should be 0x06B8.
uint8_t RESERVED : 3; //!< Reserved
uint8_t FMTUNE : 1; //!< FM Tune Enable; 0 = Normal operation 1 = Start to tune to desired FM channel
} refined;
uint16_t raw;
} kt09xx_tune;
/**
* @ingroup GA01
* @brief 3.10.4. VOLUME (Address 0x04)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 15/16.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 4; //!< Reserved
uint8_t POP : 2; //!< Audio DAC Anti - pop Configuration00 : 100uF AC - coupling capacitor 01 : 10 : 11 : Reserved 60uF AC - coupling capacitor 20uF AC - coupling capacitor 10uF AC - coupling capacitor.
uint8_t RESERVED2 : 2; //!< Reserved
uint8_t BASS : 2; //!< Bass Boost Effect Mode Selection; 00 = Disable; 01 = Low ; 10 = Med; 11 = High.
uint8_t RESERVED3 : 3; //!< Reserved
uint8_t DMUTE : 1; //!< Mute Disable; 0 = Mute enable; 1 = Mute disable.
uint8_t AMDSMUTE : 1; //!< AM Softmute Disable; 0 = AM softmute enable; 1 = AM softmute disable.
uint8_t FMDSMUTE : 1; //!< AM Softmute Disable; 0 = FM softmute enable; 1 = FM softmute disable.
} refined;
uint16_t raw;
} kt09xx_volume;
/**
* @ingroup GA01
* @brief 3.10.5. DSPCFGA (Address 0x05)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 16/17.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 5; //!< Reserved
uint8_t DBLND : 1; //!< Blend disable; 0 = Blend enable; 1 = Blend disable
uint8_t RESERVED2 : 2; //!< Reserved
uint8_t BLNDADJ : 2; //! Stereo/Mono Blend; Level Adjustment 00 = High; 01 = Highest 10; = Lowest 11 = Low
uint8_t RESERVED3 : 1; //!< Reserved
uint8_t DE : 1; //!< De-emphasis Time Constant Selection. 0 = 75us; 1 = 50us.
uint8_t RESERVED4 : 3; //!< Reserved
uint8_t MONO : 1; //!< Mono Select; 0 = Stereo; 1 = Force mono
} refined;
uint16_t raw;
} kt09xx_dspcfga;
/**
* @ingroup GA01
* @brief 3.10.6. LOCFGA (Address 0x0A)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 17.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 8; //!< Reserved
uint8_t FMAFCD : 1; //!< AFC Disable Control Bit; 0 = AFC enable; 1 = AFC disable.
uint8_t RESERVED2 : 7; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_locfga; // LOCFGA
/**
* @ingroup GA01
* @brief 3.10.7. LOCFGC (Address 0x0C)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 17.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 3; //!< Reserved
uint8_t CAMPUSBAND_EN : 1; //!< Campus FM Band Enable; 0 = User can only use 64MHz ~110MHz; 1 = User can extend the FM band down to 32MHz
uint16_t RESERVED2 : 12; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_locfgc; // LOCFGC
/**
* @ingroup GA01
* @brief 3.10.8. RXCFG (Address 0x0F)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 17.
*/
typedef union {
struct
{
uint8_t VOLUME : 5; //!< Volume Control 11111 = 0dB 11110 = -2dB 11101 = -4dB .... 00010 = -58dB 00001 = -60dB 00000 = Mute
uint8_t RESERVED1 : 7; //!< Campus FM Band Enable; 0 = User can only use 64MHz ~110MHz; 1 = User can extend the FM band down to 32MHz
uint8_t STDBY : 1; //!< Standby Mode Enable. 0 = Disable; 1 = Enable
uint8_t RESERVED2 : 3; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_rxcfg; // RXCFG
/**
* @ingroup GA01
* @brief 3.10.19. STATUSA (Address 0x12)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 18.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 3; //!< Reserved
uint8_t FMRSSI : 5; //!< FM RSSI Value Indicator; RSSI starts from -100dBm and step is 3dB namely; RSSI(dBm) = -100 + FMRSSI<4:0> *3dB
uint8_t ST : 2; //!< Stereo Indicator; 11 = Stereo state; Other = Mono state
uint8_t LO_LOCK : 1; //!< LO Synthesizer Ready Indicator; 0 = Not ready; 1 = Ready
uint8_t PLL_LOCK : 1; //!< System PLL Ready Indicator; 0 = Not ready; 1 = System PLL ready
uint8_t RESERVED2 : 2; //!< Reserved
uint8_t STC : 1; //!< Seek/Tune Complete; 0 = Not Complete; 1 = Complete; Every time the Seek/tune process begins, the STC bit will clear to zero by hardware.
uint8_t XTAL_OK : 1; //!< Crystal ready indictor; 0 = Not ready; 1 = Crystal is ok
} refined;
uint16_t raw;
} kt09xx_statusa; // STATUSA
/**
* @ingroup GA01
* @brief 3.10.10. STATUSB (Address 0x13)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 18.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 1; //!< Reserved
uint16_t RDCHAN : 15; //!< Current Channel Indicator
} refined;
uint16_t raw;
} kt09xx_statusb; // STATUSB
/**
* @ingroup GA01
* @brief 3.10.11. STATUSC (Address 0x14)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 18/19.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 6; //!< Reserved
uint8_t FMSNR : 7; //!< Channel SNR value is FM mode.; 0000000 = Minimum SNR; 1111111 = Maximum SNR
uint8_t CHIPRDY : 1; //!< Chip Ready Indicator; 0 = Chip is not ready; 1 = Chip is ready, calibration done
uint8_t RESERVED2 : 1; //!< Reserved
uint8_t PWSTATUS : 1; //!< Power Status Indicator; 0 = Power not ready; 1 = Power ready
} refined;
uint16_t raw;
} kt09xx_statusc; // STATUSC
/**
* @ingroup GA01
* @brief 3.10.12. AMSYSCFG (Address 0x16)
* @details The table below shows REFCLK possibvle values
*
* Crystal type table
* | Dec | binary | Description | defined constant |
* | -- | ------ | ----------- | --------------- |
* | 0 | 0000 | 32.768KHz | OSCILLATOR_32KHZ |
* | 1 | 0001 | 6.5MHz | OSCILLATOR_6_5MHZ |
* | 2 | 0010 | 7.6MHz | OSCILLATOR_7_6MHZ |
* | 3 | 0011 | 12MHz | OSCILLATOR_12MHZ |
* | 4 | 0100 | 13MHz | OSCILLATOR_13MHZ |
* | 5 | 0101 | 15.2MHz | OSCILLATOR_15_2MHZ |
* | 6 | 0110 | 19.2MHz | OSCILLATOR_19_2MHZ |
* | 7 | 0111 | 24MHz | OSCILLATOR_24MHZ |
* | 8 | 1000 | 26MHz | OSCILLATOR_26MHZ |
* | 9 | 1001 | ?? 38KHz ?? | OSCILLATOR_38KHz |
*
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 19.
*
*/
typedef union {
struct
{
uint8_t AMAFCD : 1; //!< AFC Disable Control in AM Mode; 0 = Enable; 1 = Disable
uint8_t RESERVED1 : 5; //!< Reserved
uint8_t AU_GAIN : 2; //!< Audio Gain Selection; 01 = 6dB; 00 = 3dB; 11 = 0dB; 10 = -3dB
uint8_t REFCLK : 4; //!< See Crystal type table
uint8_t RCLK_EN : 1; //!< Reference Clock Enable; 0 = Crystal; 1 = Reference clock
uint8_t RESERVED2 : 1; //!< Reserved
uint8_t USERBAND : 1; //!< User Definition Band Enable; 0 = Use internal defined band; 1 = Use user-defined band which is specified in USER_START_CHAN<14:0>, USER_GUARD<8:0> and USER_CHAN_NUM<11:0>
uint8_t AM_FM : 1; //!< AM/FM Mode Control; 0 = FM mode; 1 = AM mode
} refined;
uint16_t raw;
} kt09xx_amsyscfg; // AMSYSCFG
/**
* @ingroup GA01
* @brief 3.10.13. AMCHAN (Address 0x17)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 20.
*/
typedef union {
struct
{
uint16_t AMCHAN : 15; //!< AM Channel Setting; AMCHAN<14:0> = Frequency(in KHz)
uint8_t AMTUNE : 1; //!< AM Tune Enable
} refined;
uint16_t raw;
} kt09xx_amchan; // AMCHAN
/**
* @ingroup GA01
* @brief 3.10.14. AMCALI (Address 0x18)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 20.
*/
typedef union {
struct
{
uint16_t CAP_INDEX : 14; //!< On Chip Capacitor for AM Antenna Calibration; 0x0000 = Minimum capacitor; 0x3FFF = Maximum capacitor
uint8_t RESERVED1 : 2; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_amcali; // AMCALI
/**
* @ingroup GA01
* @brief 3.10.15. GPIOCFG (Address 0x1D)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 20.
*/
typedef union {
struct
{
uint8_t GPIO1 : 2; //!< CH Pin Mode Selection; 00 = High Z; 01 = Key controlled channel increase / decrease; 10 = Dial controlled channel increase / decrease; 11 = Reserved
uint8_t GPIO2 : 2; //!< VOL Pin Mode Selection; 00 = High Z; 01 = Key controlled volume increase/decrease; 10 = Dial controlled volume increase/decrease; 11 = Reserved
uint16_t RESERVED : 12; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_gpiocfg; // GPIOCFG
/**
* @ingroup GA01
* @brief 3.10.16. AMDSP (Address 0x22)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); pages 20 and 21.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 3; //!< Reserved
uint8_t INV_LEFT_AUDIO : 1; //!< Left channel inverse control; 0 = Normal operation; 1 = Inversing the left channel audio signal
uint8_t RESERVED2 : 2; //!< Reserved
uint8_t AM_BW : 2; //!< AM Channel Bandwidth Selection; 00 = 2KHz; 01 = 2KHz; 10 = 4KHz; 11 = 6KHz
uint8_t RESERVED3 : 8; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_amdsp; // AMDSP
/**
* @ingroup GA01
* @brief 3.10.17. AMSTATUSA (Address 0x24)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 21.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 8; //!< Reserved
uint8_t AMRSSI : 5; //!< AM Channel RSSI; AM RSSI starts from -90dBm and step is 3dB, namely AMRSSI(dBm) = -90 + AMRSSI<4:0> *3dB
uint8_t RESERVED2 : 3; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_amdstatusa; // AMSTATUSA
/**
* @ingroup GA01
* @brief 3.10.18. AMSTATUSB (Address 0x25)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 21.
*/
typedef union {
struct
{
uint8_t AM_AFCDELTAF : 8; //!< Signed binary, max 16KHz , min -16KHz, step is 128Hz.
uint8_t RESERVED : 8; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_amdstatusb; // AMSTATUSB
/**
* @ingroup GA01
* @brief 3.10.19. SOFTMUTE (Address 0x2Eh)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 21.
*/
typedef union {
struct
{
uint8_t FM_SMTH : 3; //!< FM Softmute Start Threshold; 000 = Lowest ... 111 = Highest
uint8_t SMMD : 1; //!< Softmute Mode Selection; 0 = RSSI mode; 1 = SNR mode (only effective in FM mode)
uint8_t VOLUMET : 5; //!< Softmute target Volume. 0 = RSSI; 1 = SNR mode (only effective in FM mode)
uint8_t AM_SMTH : 3; //!< AM Softmute Start Level. 000 = Lowest ... 111 = Highest
uint8_t SMUTER : 2; //!< Softmute Attack/Recover Rate; 00 = Slowest; 01 = Fastest (RSSI mode only); 10 = Fast; 11 = Slow
uint8_t SMUTEA : 2; //!< Softmute Attenuation; 00 = Strong; 01 = Strongest; 10 = Weak; 11 = Weakest
} refined;
uint16_t raw;
} kt09xx_softmute; // SOFTMUTE
/**
* @ingroup GA01
* @brief 3.10.20. USERSTARTCH (Address 0x2F)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 22.
*/
typedef union {
struct
{
uint16_t USER_START_CHAN : 15; //!< User band start channel, only effect when USERBAND=1. See section 3.7.3. of the Datasheet
uint8_t RESERVED : 1; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_userstartch; // USERSTARTCH
/**
* @ingroup GA01
* @brief 3.10.21. USERGUARD (Address 0x30)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio on a Chip(TM); page 22.
*/
typedef union {
struct
{
uint16_t USER_GUARD : 9; //!< User band guard number, only effective when USERBAND=1. See section 3.7.2.
uint8_t RESERVED : 7; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_userguard; // USERGUARD
/**
* @ingroup GA01
* @brief 3.10.22. USERCHANNUM (Address 0x31)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio-on-a-Chip(TM); page 22.
*/
typedef union {
struct
{
uint16_t USER_CHAN_NUM : 12; //!< User band channel number, only effective when USERBAND=1. See section 3.7.3.
uint8_t RESERVED : 4; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_userchannum; // USERCHANNUM
/**
* @ingroup GA01
* @brief 3.10.23. AMCFG (Address 0x33)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio-on-a-Chip(TM); page 23.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 5; //!< Reserved
uint8_t KEY_MODE : 2; //!< Working mode selection when key mode is selected. 00 = Working mode A; 01 = Working mode B Others = Reserved; For detailed information about working mode A and working mode B, please refer to section 3.7.1.
uint8_t RESERVED2 : 7; //!< Reserved
uint8_t AMSPACE : 2; //!< AM Channel Space Selection; 00 = 1KHz; 01 = 9KHz; 10 = 10KHz; 11 = 10KHz.
} refined;
uint16_t raw;
} kt09xx_amcfg; // AMCFG
/**
* @ingroup GA01
* @brief 3.10.24. AMCFG2 (Address 0x34h)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio-on-a-Chip(TM); page 23.
*/
typedef union {
struct
{
uint8_t RESERVED1 : 1; //!< Reserved
uint8_t TIME2 : 3; //!< 000 = Fastest...... 111 = Slowest
uint8_t TIME1 : 2; //!< 00 = Shortest...... 11 = Longest
uint16_t RESERVED2 : 10; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_amcfg2; // AMCFG2
/**
* @ingroup GA01
* @brief 3.10.25. AFC (Address 0x3Ch)
* @see KT0915; Monolithic Digital FM/MW/SW/LW Receiver Radio-on-a-Chip(TM); page 23.
*/
typedef union {
struct
{
uint8_t FM_AFC_DELTAF : 8; //!< Frequency difference between CHAN and received signal, calculated by AFC block in twos complement format. Range is - 127 to +127. Unit is KHz. This register is valid when STC=1
uint8_t RESERVED1 : 8; //!< Reserved
} refined;
uint16_t raw;
} kt09xx_afc; // AFC
/**
* @ingroup GA01
* @brief Converts 16 bits word to two bytes
*/
typedef union {
uint16_t refined;
uint16_t raw;
} word16_to_bytes;
void KT0915_setRegister(int reg, uint16_t parameter);
uint16_t KT0915_getRegister(int reg);
uint16_t KT0915_getDeviceId(void);
void KT0915_enable(uint8_t on_off);
// void KT0915_setI2CBusAddress(int N_deviceAddress); //TODO CHECK
void KT0915_setReferenceClockType(uint8_t crystal, uint8_t ref_clock);
uint8_t KT0915_isCrystalReady(void);
void KT0915_setup(uint8_t oscillator_type, uint8_t ref_clock);
void KT0915_setTuneDialModeOn(uint32_t minimu_frequency, uint32_t maximum_frequency);
void KT0915_setTuneDialModeOff(void);
void KT0915_setVolumeDialModeOn(void);
void KT0915_setVolumeDialModeOff(void);
void KT0915_setAudioGain(uint8_t gain);
void KT0915_setLeftChannelInverseControl(uint8_t enable_disable);
void KT0915_setVolume(uint8_t value);
void KT0915_setVolumeUp(void);
void KT0915_setVolumeDown(void);
uint8_t KT0915_getVolume(void);
void KT0915_SetStandby(uint8_t on_off);
void KT0915_setSoftMute(uint8_t on_off);
void KT0915_setAudioBass(uint8_t bass);
void KT0915_setAudioAntiPop(uint8_t value);
void KT0915_setAudioMute(uint8_t mute_on_off);
void KT0915_setDeEmphasis(uint8_t value);
void KT0915_setMono(uint8_t on_off);
void KT0915_setFmAfc(uint8_t on_off);
void KT0915_setAmAfc(uint8_t on_off);
void KT0915_setFM(uint32_t minimum_frequency, uint32_t maximum_frequency, uint32_t default_frequency, uint16_t step);
void KT0915_setAM(uint32_t minimum_frequency, uint32_t maximum_frequency, uint32_t default_frequency, uint16_t step, uint8_t am_space);
void KT0915_setAmSpace(uint8_t value);
void KT0915_setAmBandwidth(uint8_t value);
uint8_t KT0915_getAmBandwidth(void);
uint8_t KT0915_isFmStereo(void); //bool
void KT0915_setFrequency(uint32_t frequency);
void KT0915_setStep(uint16_t step);
void KT0915_frequencyUp(void);
void KT0915_frequencyDown(void);
inline void KT0915_setFrequencyUp() { KT0915_frequencyUp(); }; // Just an alias
inline void KT0915_setFrequencyDown() { KT0915_frequencyDown(); }; // Just an alias
uint32_t KT0915_getFrequency(void);
uint16_t KT0915_getFmCurrentChannel(void);
uint16_t KT0915_getAmCurrentChannel(void);
void KT0915_seekStation(void);
int KT0915_getFmRssi(void);
int KT0915_getAmRssi(void);
int KT0915_getFmSnr(void);
uint8_t KT0915_PLLStatus(void);
uint8_t KT0915_LOStatus(void);